How to use the Womy Sleeper

The Womy Sleeper includes rocking modes, soothing sounds, and a cry sensor. These functions can be used separately or together. Settings can be selected and adjusted via the device controls or via the app.

Control overview

Step-by-step

1. Power on (D)

Press the Power button to switch the device on. When the device light turns on, the Womy Breather is ready for use.

2. Select a rocking mode (A)

Press one of the three rocking mode buttons to select a rocking mode.
Press the center button to deselect or stop the rocking motion.
Use the plus (+) and minus (-) buttons to increase or decrease the rocking speed.

3. Select a sleepy sound (B)

Press one of the six Sleepy Sounds buttons to select a sound.
Press the center button to deselect or stop the sound.
Use the plus (+) and minus (-) buttons to increase or decrease the volume.

4. Activate the cry sensor (C)

Press the cry sensor button to activate or deactivate the cry sensor. When activated, the device monitors sound near the crib and starts the selected rocking mode and sound when crying is detected. The cry sensor can also be activated or adjusted via the app.

5. Activate the Womy Breather (E)

Press the Play button to start the selected rocking mode and sleepy sound and to enable the cry sensor if selected. After 20 minutes, the Womy Sleeper switches off automatically. The device can be restarted manually or will activate again when the cry sensor detects crying.