How to install the Womy Sleeper

Please read the safety instructions before installation.

Before you start

Use the Womy Sleeper only in certified cribs with the correct size (120 × 60 or 140 × 70).
Use only for babies up to 12 months or 12 kg (whichever comes first).
Use only the supplied power adapter.

Remove the mattress to access the base of the crib. Check that the crib has a suitable opening to route the airflow tube to the outside.

Place the Mat in the crib with the Womy logo facing up.
Always place your baby with their head towards the Womy logo and their feet towards the feet logo on the Mat.
Route the airflow tube to the outside using the most direct path. Keep the tube straight, not kinked or twisted.
Route the tube via the slats or between the side bars. If not possible, route it through an opening in the base.
Important: Never route the tube over the top edge of the crib.

Place the Womy Breather on the floor next to the crib, out of your baby’s reach.
Attach the airflow tube to the Breather until you hear a click.
Connect the power cable to the Breather and plug the adapter into a power outlet. Keep all cables out of reach.

Place the mattress back on top of the Womy Mat. Never place your baby directly on the Mat.
Check the airflow tube runs freely and all parts are out of reach.
Press the power button to switch on.
Select your preferred settings and press the Play button to activate.